Pickup Arm Falling Off Garage Door in Burnaby

 In blog

Pickup Arm Falling Off Garage Door in Burnaby

Pickup arm bracket that has been pulled away from the top section of the door during lifting.

Pickup arm that has been pulled away from top section and will require a reinforcement bar to assure that the door will not pull way again from the door. This is quite common and is more common on a windowed top section.

After pickup bracket has been removed and new reinforcement bar attached.

After old pickup bracket has been removed. Fastened pickup bar attachment that will assure that the top section has been saved from further damage.

Large fastener that was used in the pickup arm bar. This large fastener created a large hole that was not needed for the pickup bar to hold tight.

You can see the fastener hole that made from the course threaded fastener. This repair has been completed with fresh hardware and will let the make the homeowner.

After the repairs of the pickup bracket / arm have been applied.

Pickup bar that has been applied to the top section. This will keep the door lifting and lowered for years to come.

After bolts have been tightened down on the connecting portion of the garage door track.

After track bolts have been tightened. This adjustment will reduce any noise that was happening in this area of the door.

Before track bolts have been tightened. This track bolt will cause sound when the door lifts and lowers.

 

Recommended Posts

Start typing and press Enter to search