Garage Door Requiring Adjustments for Smooth Operation in Vancouver
The garage door operator has a Pickup arm that was never setup properly resulting in a door that travels further that it is designed too. You can see in the picture that the stop bolt is pressed against the top section’s strutt.
Old garage door opener that is configured to travel incorrectly. You can see in the picture that the trolley is almost touching the trolley rails stop bolt. This is a serious concern. The plastic light enclosure is getting hit by the emergency handle release. This is not what you want.
Track that is in the proper position after the pickup arm and motor’s limit were set properly. If you see your door is extended beyond the usual lift limit then there could be a issue with the motor. Please call us at: 604-890-8918 and we can discuss any repair issues that you may have.
Drum that has the cables that are not proper. You can see that the cables are not wound properly on the drum. If you see cables that are not looking normal.
Cables that are wound on the drum properly will not look like the picture that you see. The cables should be in the grooves aligned north to south. As you can see in the picture the cable is on a angle.
Properly aligned cables that are on the drum. The cables look nice and proper. This cable alignment is crucial as the cables have to lift the door up and the same time evenly.
Cables that are on the drum properly will look like the picture that is show above. The cables are looking perfect. All aligned and straight.